Job Summary
Seeking a hands-on Slot-Die Coating Engineer to operate and optimize a roll-to-roll coating system for lithium-metal battery electrodes. This role focuses on die setup, coating process development, defect troubleshooting, and producing uniform, high-loading cathode coatings. The position is execution-focused, working under the guidance of a Principal Engineer.
Key Responsibilities
Seeking a hands-on Slot-Die Coating Engineer to operate and optimize a roll-to-roll coating system for lithium-metal battery electrodes. This role focuses on die setup, coating process development, defect troubleshooting, and producing uniform, high-loading cathode coatings. The position is execution-focused, working under the guidance of a Principal Engineer.
Key Responsibilities
- Set up, operate, and maintain slot-die coating equipment.
- Manage die assembly, shim/gap adjustments, alignment, pump settings, flow rates, line speed, and drying.
- Execute coating runs independently from setup through final tape production.
- Optimize coating parameters for high-loading cathodes (30+ mg/cm²).
- Troubleshoot coating defects, including streaks, bubbles, agglomerates, and edge-bead issues.
- Improve coating uniformity, bead stability, and process consistency.
- Document coating parameters, results, photos, and process improvements after every run.
- Perform die cleaning, equipment setup, and basic maintenance.
- 3-5 years of hands-on slot-die coating experience, with direct responsibility for operating and setting up the die.
- Practical experience with roll-to-roll coating processes.
- Strong understanding of coating parameters, bead stability, shim/gap adjustments, and defect troubleshooting.
- Ability to independently operate and troubleshoot coating equipment.
- Bachelor's or Master's degree in Chemical, Materials, or Mechanical Engineering, or equivalent practical experience.
- Must be authorized to work in the US without sponsorship.
- Willingness to relocate to Tallahassee, FL.
- Battery electrode or lithium-ion battery coating experience.
- Experience with high-solids slurry and thick electrode coatings.
- Background in films, tapes, membranes, photovoltaics, or optical coatings using slot-die technology.
- Experience with calendaring, slitting, notching, and punching.
- Pilot-line, scale-up, dry room, or glovebox experience.
